φ 35 PTFE Wire Extrusion Machine: Innovative Screw Design Optimizes PTFE Wire Mixing, Improving Production Efficiency and Product Consistency

• Customization: Available
• After-sales Service: Online Support and Overseas Services
• Driven Type: Electric
• Model NO.: 35
• Condition: New
• Certification: ISO, CE
• Warranty: One-Year Warranty and Lifetime Maintenance
• Screw: Single-Screw
• Center Height: 1020mm
• Weight: 5000kg
• Extrusion Material: FEP/PFA/ETFE/Xetfe
• Extrusion Volume: 15kg/H-30kg/H
• Applicable Finished Wire Diameter Range: 0.25-10.0mm
• Production Speed: 0-300m/Min
• Conductor Structure: Single Conductor or Stranded Conductor
• Insulation Structure: Insulation, Co-Extrusion, Two-Layer Extrusion, Thr
• Applicable Line Type: 10n-100nround Wire, Flat Wire, Flat Wire
• Outlet Mode: Active Pay-off Machine, Tension Pay-off Machine, B
• Concentricity: Greater Than or Equal to 95%
• Power: Siemens Motor, Siemens Servo, Yaskawa Servo
• Controller: Siemens, Yaskawa
• Cooling Method: Air Cooling, Water Cooling
• Voltage: Applicable to Your Local Voltage
• Transport Package: Wooden Crate
• Specification: Customized
• Trademark: CZ
• Origin: Guangdong. China
• HS Code: 8479400000
• Production Capacity: 5PCS/Month
• Package Size: 500.00cm * 500.00cm * 500.00cm
• Package Gross Weight: 500.000kg

Product Description

Product Advantages
Introduction to φ35 PTFE Extruder

CZ φ35 PTFE extruder integrates cutting-edge scientific and technological achievements, demonstrates superb efficiency in the extrusion process, and has a stable and consistent operating state, which can fully meet the stringent requirements of modern and efficient production.

The equipment uses superior raw materials and combines exquisite manufacturing technology, which greatly enhances its durability and effectively reduces the subsequent maintenance frequency and cost investment. Its operation design is simple and intuitive with extremely high accuracy. Operators can easily fine-tune the extrusion parameters, thereby effectively ensuring the high-quality output of products.

The extruder is widely used in many important fields such as electronics and chemicals. It can flexibly process PTFE products of various specifications. With its reliable quality and excellent performance, it presents professional and high-quality one-stop solutions to users, helping users achieve better results and benefits in related fields.

 

 

CZ φ35 PTFE extruding machine
Extrusion material	FEP,PFA,ETFE,XETFE
Extrusion volume	15kg/h~30kg/h
Applicable finished wire diameter range	φ0.25~10.0mm
Production speed	0~300m/min
Conductor structure	Single conductor or stranded conductor
Insulation structure	Insulation, co-extrusion, two-layer extrusion, three-layer extrusion, injection molding
Applicable line type	Round wire, flat wire, flat wire
Outlet mode	Active pay-off machine, tension pay-off machine, barrel pay-off machine, wire drawing annealing tandem
Concentricity	≥95%
Cooling method	Air Cooling
Power	Siemens motor, Siemens servo, Yaskawa servo
Controller	Siemens, Yaskawa
Control System	Advantech Industrial Control, Siemens System
Automation	Automatically control the whole machine synchronization, automatically change the reel without stopping the machine, automatically load and unload the reel, and automatically remove the defective points
Testing equipment	SIKORA,ZUMBACH,Proton,TAKIKAWA
Voltage	Applicable to your local voltage
Scope of application	Cables (BV, BVR, BYY, BVVB, RV, RVS, RVV), electronic cables, medical signal cables, new energy data cables, high-speed transmission data cables, coaxial cables, optical fiber cables, etc.
Features	1. High configuration, low energy consumption, high production efficiency; 2. Screw-high accuracy, good plasticization, high surface luster on the wires, and the core of the wires is continuous and smooth; 3. All electrical appliances use international front -line brands, the production line has good stability, strong work continuity, and long life; 4. The product temperature control accuracy is high, and the temperature is stable (using japan -Rkc); 5. The gear box tooth surface is treated with high -end cymbals, and precision grinding, with anti -wear and small noise; 6. PLC is controlled by computer control, which is more convenient to operate.